Toppower Asia home

5 configurations

Pad-mounted transformers, single-phase and three-phase

Single- and three-phase pad-mounted transformers, 15–1,500 kVA, loop or radial feed, dead-front, built to ANSI/IEEE C57.12.

13.8kV to 480V Dead-Front Oil-Immersed Pad Transformer, 225/750/1500kVA 3-Phase (product scene)
Configurations
5
Rating range
15 kVA – 1.5 MVA
Voltage class
13.8–34.5 kV
Frequency
50 / 60 Hz

5 products

Products

Compare products

How to choose pad-mounted transformers

Pad-mounted transformers sit on a concrete pad at ground level in a tamper-resistant cabinet, with high-voltage and low-voltage compartments at the front. They are the standard for underground residential and commercial distribution in North America and many 60 Hz markets, and they are widely used at solar plants.

Specify single- or three-phase, loop or radial feed, dead-front or live-front HV terminations, the fusing scheme (for example bayonet expulsion fuses with current-limiting backup), the load-break switch arrangement and the secondary voltage such as 120/240 V, 208Y/120 V or 480Y/277 V.

Further reading

Pad-Mounted Transformers: common questions

What is a pad-mounted transformer?

A pad-mounted (padmount) transformer is a ground-level distribution transformer in a locked, tamper-resistant steel cabinet that sits on a concrete pad. Underground cables enter from below, so it is used for residential subdivisions, commercial sites and solar plants where overhead lines are not wanted.

What sizes do pad-mounted transformers come in?

Single-phase pad-mounted transformers are commonly built up to 167 or 250 kVA, and three-phase units from 45 or 75 kVA up to 2500 kVA and above for industrial and solar use. The configurations listed here run from 15 to 1500 kVA; other ratings can be quoted.

What is the difference between loop feed and radial feed?

Radial feed has one set of HV bushings and is the end of a line. Loop feed has two sets so the cable can continue to the next transformer, and with a load-break switch the loop can be sectionalised for maintenance.

Dead-front or live-front?

Dead-front units use separable elbow connectors with no exposed energised parts, which is safer for operators and the common choice today. Live-front terminations are still used on some older networks.

Are pad-mounted transformers suitable for solar farms?

Yes. They are often used as inverter step-up transformers at PV plants; the design should account for the daily load cycle and inverter harmonics.

Application examples using pad-mounted equipment

Send your single-line diagram. Get a technical proposal back.

Tell us the rating, voltages and site. Our engineers review it against your network before pricing, and reply with ratings, losses, dimensions, test scope and a quotation.

Rated power, voltages, frequency, standard, site conditions and destination port help us reply with a firm proposal.

Send via WhatsApp

Replies come from kevin@toppower-asia.com. Office hours are Monday to Friday, 9:00–18:00 China Standard Time.

Press Enter to see all matching products. Use ↑ ↓ to move through results.