# Solar Battery Energy Storage Container, 500kW or 1000kW with 1MWh to 8MWh Capacity

Category: [Battery Energy Storage Systems](https://www.toppower-asia.com/products/energy-storage-system/)  
URL: https://www.toppower-asia.com/products/energy-storage-system/solar-battery-energy-storage-container-500kw-or-1000kw/  
Supplier: Shanghai Toppower-Asia Co., Ltd. (Toppower Asia), Shanghai, China — kevin@toppower-asia.com, WhatsApp +86 186 1664 1467

Built to cover a wide spread of commercial and utility projects, this containerised solar battery system is offered at 500 kW or 1000 kW and from 1 MWh up to 8 MWh of lithium-ion storage. Liquid cooling, an integrated BMS and an IP67 enclosure let it bank PV and grid electricity for hybrid-grid operation.

## Key benefits

- **Two power classes:** – 500 kW and 1000 kW ratings cover both mid-size and larger sites.
- **Capacity to 8 MWh:** – Energy steps of 1, 2, 3, 5, 6, 7 and 8 MWh fit different discharge durations.
- **Liquid-cooled racks:** – Uniform cell temperature supports consistent output over the system's life.
- **Monitored by BMS:** – CAN and RS485 interfaces share battery data with the site controller.
- **Modular scaling:** – Additional containers can be added as demand grows.

## Technical data

| Parameter | Specification |
| --- | --- |
| Equipment type | Containerised battery energy storage system (BESS) |
| Cell chemistry | Lithium-ion |
| Rated power | 500 kW / 1000 kW |
| Energy range | 1MWh – 8MWh |
| Nominal DC voltage | 768 V |
| Series/parallel arrangement | 10P384S |
| Thermal management | Liquid cooling |
| Battery management | Integrated Battery Management System (BMS) |
| Grid mode | Hybrid grid |
| Charging source | Solar panel |
| Communication interface | CAN / RS485 |
| Ingress protection | IP67 |
| External dimensions (L × W × H) | 12196 × 2438 × 2896 mm |
| Shipping weight | 27.5 t |
| Intended sector | Industrial and commercial energy storage |

## Construction & engineering

Inside the standard container shell, stacked lithium modules sit in upright racks connected through orange high-voltage connectors. Heat is removed by the liquid circuit, with louvred vents and fans assisting air movement. A dedicated PCS and control section holds the monitoring panel, and liftable corner castings plus IP67 sealing make the unit easy to ship and install outdoors.

## Typical applications

- Solar-plus-storage plants
- Industrial and commercial load management
- Peak shaving and load shifting
- Hybrid-grid backup across a broad capacity range

## Configuration options

Power rating (500 kW or 1000 kW), capacity from 1 MWh to 8 MWh, DC voltage, grid set-up and communication interface can be configured for each project.

## Information needed for a quotation

- Required energy capacity (kWh/MWh) and continuous power (kW/MW)
- Selected power class (500 kW or 1000 kW) and target discharge duration
- Preferred DC voltage level and any grid-code or interconnection standard that applies
- Grid frequency and AC connection point details if a PCS interface is needed
- Site conditions: ambient temperature range, altitude, humidity, coastal or dusty exposure
- Required EMS/SCADA protocol beyond CAN / RS485
- Number of units, destination port and preferred Incoterms

Request a quotation: https://www.toppower-asia.com/contact/

> Data on this page is for reference; confirmed specifications, dimensions and packaging are set out in the technical agreement and order documents.
